Shop addition in Nov. 2020.
For more detailed info on the lathe: https://www.precisionmatthews.com/shop/pm-1236t/
Model PM-1236T Main Specifications
Type: Geared Head
Model: PM-1236T
Max. Swing over bed: 12″
Max. Swing over cross slide: 6″
Max. Swing in gap: 18″
Center Height: 6″
Spindle Center Line Distance from Floor: Approx. 45” (with opt. stand)
Max. Distance Between Centers: 36″
Width of Bed: 7-1/2”
Bed Height: 11.5”
Spindle Bore: 1-9/16”
Spindle Taper, Internal: MT #5
Spindle Mounting System: Cam Lock, D1-4
Spindle Speeds: 90-1600 RPM, 12 Steps
Bed Length: 59-3/4″
Lead Screw Diameter / Pitch: 7/8” / 8 TPI
Feed Rod Diameter: 3/4”
Inch Thread Cutting Range: 4-112 TPI, 40 Different Threads
Metric Thread Cutting Range: .25-7.5mm Pitch, 24 Different Threads
Longitudinal Feed Range (Left and Right): .002-.02 Inches Per Revolution
Cross Feed Range (In and Out): .001-.01 Inches Per Revolution
Spindle Length through headstock, Protruding End to D1-4 Chuck Mounting face: 13-3/4”
Spindle Length through headstock, Protruding End to 3 Jaw Chuck face: 17-1/4”
Cross Slide Travel: 6-3/4”
Compound Travel: 3-1/2”
Tail Stock Quill Diameter / Travel / Taper: 1-9/16” / 4” / MT#3
Main Motor Horsepower: 1.5 HP
Voltage / Phase/ Amps: 220 Volt, 1 Phase / 10 Amps Max., OR 220 Volt, 3 Phase, 10 Amps Max (Select single or 3 phase version when ordering)
Machine Dimensions, Assembled with stand: 51”H x 29”W x 66”L
Machine Weight, without stand: 850 LBS
Machine Weight, With Steel Stand: 1100 LBS (Please compare optional stand, much heavier, made with 3/16″ Steel and 6 total leveling points)